Epson Stylus Pro 9000 - Print Engine, Service Manual, Page: 158 / 198

EPSON Stylus Pro 9000
Appendix 158
7.2.4 Electrical
The electrical specifications are for the 120 and 230 V units.
Rated voltage 120 to 140 VAC
Input voltage range 90 to 264 VAC
Rated frequency range 50 to 60 Hz
Input frequency range 49.5 to 61 Hz
Rated current 120 V: 0.5 A
230 V: 1.0 A (maximum 1.8 A)
Power consumption Approximately 100 W (operating)
Approximately 30 W (standby)
(ISO/IEC 10561 letter pattern)
Energy Star compliant
Insulation resistance 10 M
Ω
minimum (between AC line
and chassis 500 VDC)
Dielectric strength 1500 V rms 1 minimum
(between AC line and chassis)
7.2.5 Environmental
Temperature
Operation 59 to 95 °F (15 to 35 °C)
Storage –4 to 104 °F (–20 to 40 °C)
Transportation –4 to 140 °F (–20 to 60 °C)
Humidity (without condensation)
Operation 30 to 80%
Storage 20 to 85%
Transportation 5 to 85%
Vibration resistance
Operation 0.15 G, 10 to 55Hz / X, Y, Z direction
Storage 0.50 G, 10 to 55Hz / X, Y, Z direction
Shock resistance
Operation 1 G, within 1 ms / X, Y, Z direction
Storage 2 G, within 2 ms / X, Y, Z direction
7.2.6 Ink Cartridge
Shape
Each ink cartridge is uniquely shaped so the cartridges cannot be
inserted into the wrong slots.
Ink colors
Black, cyan, magenta, yellow, light cyan, light magenta
NOTE: Less than 1 month at 104 °F (40 °C); less than 120
hours at 140 °F (60 °C)
When storing the printer, make sure the printheads
are in the home, capped, position.
Before transporting the printer, remove the ink
cartridges and turn the ink valves screws to the
closed position. Also make sure the printheads are
in the home, capped, position. After transporting the
printer, install new ink cartridges.
When the temperature drops below 5 °F
(
–15 °C
)
, the
ink in the cartridges and printheads freezes. The ink
thaws completely after 3 hours at 77 °F (25 °C
)
.