Epson Stylus Pro 7890 Series User Manual Download Page 73

Page: 73 / 224

Handling Paper and Other Media

3. Feed the sheet into the paper slot until it meets resistance. Make sure the

right edge of the paper is straight and aligned with the vertical line on
the roll paper cover.

4. Press

. The sheet feeds into printing position automatically.

5. If you see a question on the display about paper settings, select

Yes

if the

settings are correct, or select

, then change the settings.

6. Press

7. Print your page. After it is finished, the sheet stays in the printer.

8. To remove your print, press the

button while holding the sheet.

Summary of Contents for Stylus Pro 7890 Series

































































































































































































































Search results

Summary of Contents for Stylus Pro 7890 Series

Reviews:

Related manuals for Stylus Pro 7890 Series

Brands by name

Popular brands

Epson Stylus Pro 7890 Series, User Manual

Search results

Summary of Contents for Stylus Pro 7890 Series

Reviews:

Related manuals for Stylus Pro 7890 Series

Brands by name

Popular brands