Epson Stylus Pro 7890 Series, User Manual

Page: 108 / 224

108
108 | Printing With Epson Drivers for Windows
Sizing Images for Borderless Printing on Roll
Paper
For true borderless printing on roll paper, you can select either
Auto
Expand
or
Retain Size
or create a custom paper size, as described on
page 116. Your image may be clipped on the left and right edges, but you
can minimize clipping by sizing your image according to the roll paper width
and by adjusting the length by adding 0.1 inch (2.54 mm) to it.
Auto Expand
provides the best solution for borderless printing with
minimal image clipping because you can create an image width almost equal
to the width of the roll media. If you use
Retain Size
, you need to size your
image slightly wider than the paper width. See the table below for guidelines:
* Epson Stylus Pro 9890 only
Roll paper width
Image width
(with Auto Expand) Image width
(with Retain Size)
10 inches
(254 mm) 9.7075 inches
(246.57 mm) 10.25 inches
(260.35 mm)
13 inches
(330 mm) 12.8 inches
(325.1 mm) 13.25 inches
(338.8 mm)
16 inches
(406 mm) 15.8 inches
(401.3 mm) 16.25 inches
(412.75 mm)
17 inches
(432 mm) 16.8 inches
(426.7 mm) 17.25 inches
(438.15 mm)
24 inches
(610 mm) 23.8 inches
(604.5 mm) 24.25 inches
(615.9 mm)
36 inches*
(914 mm) 35.8 inches
(909.3 mm) 36.25 inches
(920.7 mm)
44 inches*
(1118 mm) 43.8 inches
(1112.5 mm) 44.25 inches
(1124.0 mm)