Epson Stylus Pro 7500, Reference Manual

Page: 99 / 184

Paper Handling
4-15
Using Cut Sheet Media
Loading cut sheet media longer than 483 mm
(long edge of Super A3/B size)
To load cut sheet media longer than 483 mm, follow the steps
below. To load thick paper (0.5 mm to 1.5 mm), see “Printing on
thick paper (0.5 mm to 1.5 mm)” on page 4-19.
c
Caution:
As much as possible, keep your fingers off the printable surface
of the media, as fingerprints may reduce printout quality.
1. Make sure that the printer is on and the roll paper cover is
closed.
2. Press the Paper Source button repeatedly until the Sheet
light comes on.
3. Make sure the Operate light and Pause light are not flashing,
then push the paper set lever all the way down.
appears on the LCD panel.