Maintenance and Transportation
5-15
3. Move the printer to the new location carefully. Relock the
casters and extend the stabilizer knobs after moving the
printer.
Setting up the printer after transporting it
The steps you need to take to set up the printer after transporting
it are almost identical to the steps carried out the first time you
set up the printer. When you set up the printer again, see the
Assembly and Setup Instructions
, and note the following points:
❏
After transporting the printer, EPSON recommends you
perform a nozzle check, clean the print heads, and realign the
print heads to ensure print quality. See your
Startup Guide.
❏
EPSON recommends installing new ink cartridges after
transporting the printer. If you reinstall the cartridges you
removed before transporting, the printer cannot determine
the correct level of remaining ink. The Ink Out lights may not
flash to warn you when a cartridge is almost out of ink.
Summary of Contents for Stylus Pro 7500
