Epson Stylus Pro 7450 User Manual Download Page 206

Page: 206 / 373

Paper Handling

206

Loading roll paper

To load roll paper, follow the steps below.

Note:

You may want to setup the paper basket before printing. See “Setting
the Paper Basket” on page 237.

1. Open the roll paper cover. Make sure that the roll paper is

attached to the printer properly.

2. Make sure that the printer is on.

3. Make sure that the

Power

light is not flashing, and then set

the paper lever to the released position. The

LEVER RELEASED.

LOAD PAPER

appears on the LCD panel.

Caution:

Do not set the paper lever to the released position while the

Power

light is flashing. Doing so may damage the printer.

Summary of Contents for Stylus Pro 7450






















































































































































































































































































































































































Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands

Epson Stylus Pro 7450, User Manual

Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands