Epson Stylus Pro 7450, User Manual

Page: 166 / 373

The Control Panel 166
When the same data is printed with a 3 mm margin and a 15 mm
margin and compared, you may notice that part of the right side
of the 15 mm margin image is not printed.
PAPER SIZE CHECK
Select
ON
to check the width of paper loaded in the printer to match
the data width. When you select
OFF
, the printer may print beyond
the width of paper even if the paper width does not match the
data. We recommend you select
ON .
PAPER SKEW CHECK
When you select
ON
, if the paper is not straight,
PAPER SKEW
appears on the LCD panel and the printer stops printing. When
you select
OFF
, a paper align error does not occur even if the
printed data is out of range of the paper, and the printer continues
to print.
TIME OUT
The setting range is 30 to 300 seconds. If the cable of your printer
is unplugged or your printer hangs up for more than the set time
range, the print job is cancelled and the printer starts paper feed.
Area to be
Clipped
15 mm
Right
15 mm
Left
Printable area
Leading edge
Bottom
15 mm
Print direction
Roll paper
Top
15 mm