Epson Stylus Pro 7000 Series, Printer Manual

Page: 47 / 147

2-13
Handling Paper | 2-13
3. When you have selected the setting you want, press the
Enter
button to
save it.
4. Press the
SelecType
button to exit the Printer Setting menu.
Using Cut Sheet Paper
You can print on many types of cut sheet paper and other media. The
printer accepts sheets ranging from 8.5 × 11 inches to 24 × 36 inches. You
can leave your roll paper in the printer when you print on cut sheets; make
sure it is rolled up and fastened with the roll paper belt, as described on
page 2-7.
If you’re using paper more than 19 inches long or stock more than 0.5 mm
thick, see the following sections for additional instructions. You will not be
able to follow the “autoload” procedure described in this section.
Before you start, make sure the printer is on and roll paper is not loaded for
printing. Then follow these steps:
1. Make sure the roll paper cover is closed.
2. Press the
Paper Source
button repeatedly until the
Sheet
light
comes on.
3. Make sure the paper set lever is all the way up.