Epson Stylus Pro 4800 Portrait Edition, Service Manual

Page: 59 / 506

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Product Description Operating Panel 59
1.4.4.19 Nozzle Check Pattern Printing
Selecting this mode allows the user to print the nozzle check pattern, firmware
version, used paper/ink, and maintenance tank counter.
Nozzle checks method in nozzle check pattern print is switched to either auto
or manual by cleaning setting ON/OFF at nozzle check.
†
When setting is ON: Perform auto nozzle check pattern printing.
†
When setting is OFF: Perform nozzle check pattern printing as usual.
Figure 1-13. Nozzle Check Pattern Printing (Stylus Pro 4800)
Figure 1-14. Nozzle Check Pattern Printing (Stylus Pro 4880/4880C)
†
Order of colors from left
„
8-color (Stylus Pro 4800):
Photo Black / Matte Black
→
Cyan
→
Magenta
→
Yellow
→
Light Black
→
Light Cyan
→
Light Magenta
→
Light Light Black
„
8-color (Stylus Pro 4880/4880C):
Photo Black / Matte Black
→
Cyan
→
Vivid Magenta
→
Yellow
→
Light Black
→
Light Cyan
→
Vivid Light Magenta
→
Light
Light Black
„
4-color (Stylus Pro 4400/4450):
Matte Black 1
→
Matte Black 2
→
Cyan 1
→
Cyan 2
→
Magenta 1
→
Magenta 2
→
Yellow 1
→
Yellow 2
†
Each parameter indicates the following;
„
<Z>: 0
„
<xxxx>: Firmware version
„
<y.yy>: Network Firmware version
(Stylus Pro 4450/4880/4880C only)
„
I : Number of colors (four or eight) used for printing
„
B : Business system setting
„
C : Custom version setting
„
<zzz>: Maintenance tank available quantity
„
<aaaaa.a>: Total ink counter just before print the last nozzle check
pattern (5.1 figures)
„
<bbbbb.b>: Total ink counter just before print the nozzle check pattern
(5.1 figures)
„
<ccccc.c>: Value of <aaaaa.a>-<bbbbb.b> (5.1 figures)
„
<ddddd.d>: Total paper counter just before print the last nozzle check
pattern (5.1 figures)
„
<eeeee.e>: Total paper counter just before print the nozzle check
pattern (5.1 figures)
„
<fffff.f>: Value of <ddddd.d>-<eeeee.e> (5.1 figures)
NOTE: When printing a nozzle check pattern, the printer ignores the top
margin specified from the panel setting it to 20mm to prevent top
margin being rubbed in PGPP AND PSPP.
Version : A<Z><xxxx>
Maintenance Tank : <zzz>%
Cur. Ink Count : <aaaaa.a>ml Prev.Ink Count :<bbbbb.b>ml C - P:<ccccc.c>ml
Cur. Paper Count : <ddddd.d>cm Prev.Paper Count:<eeeee.e>cm C - P:<fffff.f>cm
Version : A<Z><XXXX>-<y.yy>.IBC
Maintenance Tank : <zzz>%
Cur. Ink Count : <aaaaa.a>ml Prev.Ink Count :<bbbbb.b>ml C - P:<ccccc.c>ml
Cur. Paper Count : <ddddd.d>cm Prev.Paper Count:<eeeee.e>cm C - P:<fffff.f>cm