Epson Stylus Pro 4800 Portrait Edition Reference Manual Download Page 247

Page: 247 / 396

The Control Panel

247

Eng

1. Make sure that paper is loaded in the printer.

2. Press the

button to enter the SelecType mode.

3. Press the

Paper Feed

button to display

TEST PRINT

, and then press the

button.

4. Press the

Paper Feed

button to display

NOZZLE CHECK

5. Press the

button to display

6. Press the

button again to start printing a nozzle

check pattern.

After a nozzle check pattern is printed, the printer exits the
SelecType mode and returns to the

READY

status.

Nozzle check pattern examples:

If you find that any dots are missing from the test lines in the
pattern, you need to clean the print heads. Press the

button for more than 3 seconds or access the Head Cleaning utility
software. For Windows, see “Cleaning the print head” on page
80. For Mac OS 9.x, see “Cleaning the print head” on page 165.
For Mac OS X, see “Cleaning the print head” on page 219.

good

head cleaning necessary

Summary of Contents for Stylus Pro 4800 Portrait Edition













































































































































































































































































































































































































Search results

Summary of Contents for Stylus Pro 4800 Portrait Edition

Reviews:

Related manuals for Stylus Pro 4800 Portrait Edition

Brands by name

Popular brands

Epson Stylus Pro 4800 Portrait Edition, Reference Manual

Search results

Summary of Contents for Stylus Pro 4800 Portrait Edition

Reviews:

Related manuals for Stylus Pro 4800 Portrait Edition

Brands by name

Popular brands