Epson Stylus pro 3800 portrait edition User Manual Download Page 116

Page: 116 / 198

The Control Panel

116

EPSON Stylus Pro 3800

User’s Guide

Printing a status sheet

While in Menu mode, you can print a status sheet to see the current default values. To print
a status sheet, follow the steps below.

1. Make sure that paper is loaded in the printer.

2. Press the

Menu/Right

button to enter Menu mode.

3. Press the

Paper Feed/Down

Ink Cover Open/Up

button to display

TEST PRINT

, and then press the

Menu/Right

button.

4. Press the

Paper Feed/Down

Ink Cover Open/Up

button to display

STATUS SHEET

, and then press the

Menu/Right

button.

5. Press the

Enter

button to start printing a status sheet.

After printing is finished, the printer exits Menu mode and returns to the

READY

status.

Maintenance Mode

Maintenance mode setting procedure

This section describes how to enter Maintenance mode and how to make settings with the
buttons on the control panel.

To make the Maintenance mode settings, follow the steps below.

Note:

Press the

Back/Left

button to return to the previous step.

Enter Maintenance mode

Confirm the printer is turned off first. While pressing and holding the

Cancel/Reset

button, press the

Power

button to turn on the printer.

Select an item

Press the

Paper Feed/Down

Ink Cover Open/Up

button to select a desired

item.

Set the item

Press the

Menu/Right

button to enter the selected item. The first parameter is

displayed on the LCD panel.

Summary of Contents for Stylus pro 3800 portrait edition







































































































































































































Search results

Summary of Contents for Stylus pro 3800 portrait edition

Reviews:

Related manuals for Stylus pro 3800 portrait edition

Brands by name

Popular brands

Epson Stylus pro 3800 portrait edition, User Manual

Search results

Summary of Contents for Stylus pro 3800 portrait edition

Reviews:

Related manuals for Stylus pro 3800 portrait edition

Brands by name

Popular brands