Epson Stylus Photo 950 User Manual Download Page 96

Page: 96 / 368

Printing on CD-R

2. Double click the

EPSON

icon.

3. Select

Install Software

, and click

4. Click

Advanced

and select only

EPSON Print CD

, then click

Install

5. Follow the on-screen instructions.

Print position adjustment

If the print position is misaligned after printing, adjust it as
follows.

For Windows users

1. Print the print position check pattern

To check the print gap, print the position check pattern first.

1. Place the CD-R Print Position Check Disk attached to the

CD-R tray on the CD-R tray and insert it into the printer.

Note:

❏

Refer to “Setting CD-R” on page 100 for more details about
CD-R setting.

❏

If the print position check sheet is warped, flatten it before
loading it.

2. Double-click the EPSON Print CD icon on the desktop to

access EPSON Print CD.

Summary of Contents for Stylus Photo 950

















































































































































































































































































































































































Search results

Summary of Contents for Stylus Photo 950

Reviews:

Related manuals for Stylus Photo 950

Brands by name

Popular brands

Epson Stylus Photo 950, User Manual

Search results

Summary of Contents for Stylus Photo 950

Reviews:

Related manuals for Stylus Photo 950

Brands by name

Popular brands