EPSON STYLUS OFFICE TX600FW
Wireless Printer Installation Guide
By using Wireless Router and Access Point
Installation Checklist:
Step 1: Confirm the computer has been connected to network. Check the
SSID
(Network
Name) and
Passphrase
(Security key and password).
Step 2: Setup the Wireless LAN on the printer panel.
Step 3: Confirm the connection status.
Step 4: Install the printer driver by
Infrastructure mode
Before installation, please check the following information:
1.
SSID (network name)
2.
Type of Security Setting
Note: The printer supports WEP-64bit
、
WEP-128bit
、
WPA-PSK TKIP or WPA-PSK
AES only.
3.
Security Key and Passphrase
Hints:
a.
In order to protect your wireless network and data transmission, we recommend using a
security and encryption technologies with a particular SSID and security or Passphrase
to prevent intrusion from unknown users.
b.
For any details information about wireless router and access point, please contact
Summary of Contents for Stylus Office TX600FW Series
Page 14: ... 11 Select the printer from the list please click Next 12 Select Wireless and click Next ...
Page 16: ... For WEP Security settings 15 Recommend using Auto DHCP click Next ...
Page 18: ... 18 Suggest keeping the printer name click Next 19 If click Yes Test Page will be printed ...
Page 19: ... 20 If the page is printed successfully the installation is completed ...
