Unpacking
Unpacking
Unpacking
Unpacking
Setting Up the Stylus CX
Setting Up the Stylus CX
Setting Up the Stylus CX
Setting Up the Stylus CX
1. Unlocking
2. Attaching the Parts
3. Plugging in the Power Cord
4. Installing the Ink Cartridges
1. Press the
P
On button to turn on this product.
2. Shake the package of ink cartridges four or
five times, then open the package and
remove the ink cartridges.
c
Caution:
❏
Be careful not to break the hook on the side of the cartridge when you
remove it from the package.
❏
Do not shake the ink cartridge after removing from the package; this
can cause leakage.
❏
Do not remove or tear the label on the cartridge; this can cause
leakage.
3. Insert the ink cartridges as illustrated below.
Note:
Install all ink cartridges. This product does not work unless all cartridges are
installed properly.
4. Close the scanner unit.
Ink charging starts. It takes about
two minutes
. While charging, this product
produces a variety of mechanical sounds. This is normal. When the
On
light stops
flashing, ink charging is complete.
c
Caution:
❏
Do not turn the power off during the ink charging process.
❏
Do not load paper until ink charging is complete.
Note:
The ink cartridges packaged with this product are partly used during the initial
setup. To produce high quality printouts, the print head in this product must be
fully charged with ink. This one-time process consumes a considerable amount
of ink, but subsequent cartridge sets will last for their full rated life.
5. Selecting Language
You can select your preferred language for use on the LCD panel. For details, see
Chapter 1 in the Copy Guide.
This product is now ready to make copies. See “Using the Copy Feature” on the reverse
side. If you want to print data or scan images, set up your computer as described below.
Setting Up the Computer
Setting Up the Computer
Setting Up the Computer
Setting Up the Computer
1. Connecting
1. Turn off your Stylus CX.
Note:
Do not turn on this product until a message prompts you to do so.
2. Connect the USB cable.
Note:
If the “Add New Hardware Wizard” dialog box appears, click
Cancel
and
disconnect the USB cable from this product. Then return to step 1. Connecting.
2. Installing the Software
c
Caution for Macintosh users:
Turn off all virus protection programs before you install the software.
For Mac OS X users, see "Installing the Software for Mac OS X" on the reverse side.
1. Make sure that this product is off.
2. Insert the software CD into the CD-ROM drive.
For users of Mac OS 8.6 to 9.x:
Double-click the
EPSON
icon in the EPSON folder.
3. The EPSON Installation Program dialog box appears.
Select
Install Software
, and then click
.
4. Follow the on-screen instructions.
5. For users of Mac OS 8.6 to 9.x
After installing the software, choose
Chooser
from the
Apple menu, and then select the icon for this product
and the port that this product is connected to.
Note for Windows users:
You may need to restart your computer while installing the software. If a message
instructing you to restart appears, remove the software CD, then click
Restart
. After
restarting make sure this product is off, then reinstall the software.
This product is now ready to print and scan. The Reference Guide includes detailed
information about printing and scanning. To view the Reference Guide, see "Viewing the
Reference Guide" on the reverse side.
The contents may vary in certain locations. Remove all tapes and protective materials following the Notice Sheet.
power cord
USB cable
Power cord may come
attached in some countries.
feeder guard
ink cartridges
paper support
CD-ROM
Be sure to use the USB cable
that comes with this product.
Menu
On
Error
Scan
Recall
Reset
Reset all(3sec)
Save(3sec)
Press the
P
On button.
Do not touch this part.
①
②
①
②
③
On
Scan
Recall
Save(3sec)
On
Error
Scan
Recall
Reset
Reset all(3sec)
Save(3sec)
Flashing
On
Menu
Co
py
On
Error
Scan
Recall
Reset
Copies
Value
B&W
Stop
Return to Top
Color
Enter
Reset all(3sec)
Save(3sec)
LCD panel
Menu
Copy
On
Error
Scan
Recall
Reset
Copies
Value
B&W
Stop
Return to Top
Color
Enter
Reset all(3sec)
Save(3sec)
Press to turn off.
For users of Mac OS 8.6 to 9.x
EPSON Installation Program
dialog box
Setup
English
4033233-00
xxx
c
Cautions
must be observed
to avoid damage to your
equipment.
Notes
contain important
information and useful tips on the
operation of this product.
Cautions and Notes
