The printer driver installed with Windows 3.1 does not work
correctly after you upgrade to Windows 95.
You need to reinstall the printer driver after upgrading to
Windows 95 so the driver is set up correctly for Windows 95.
See the Setup Guide for instructions.
You see error messages because of printing conflicts.
Before sending print jobs to the printer, the EPSON Spool
Manager stores them in a temporary directory. If you see
conflict error messages or printing is very slow, the problem
may be caused by other temporary files in this directory. To
change the EPSON Spool Manager default directory, follow
these steps:
1. Make a directory on your hard disk where you would like the
Spool Manager to place the files, for example, C:\SPLTEMP.
2. Open the EPSON program group and double-click the
Spool Manager
icon.
3. Make sure
Stylus COLOR IIs
is selected, and then open the
Queue menu.
4. Select
Setup
. In the Queue Setup dialog box, change the
spool directory to the one you created in step 1.
5. Also make sure the
Use Print Manager for this port
checkbox is checked. Then select
OK
.
6. Open the Options menu and select
Default Spool Directory
.
7. In the dialog box, change the spool directory to the one you
created in step 1. Then select
OK
.
8. Close the Spool Manager.
R
Hudson User’s Guide
A5 size
Chapter 4
10-28-95
DR, pass 2-Rev1
Troubleshooting
4-9
