6. Press
Enter
to select
Calibrate
. The printer starts calibrating.
7. The next screen prompts you to enter an offset value to align
the print head.
Wait for 1 minute while the printer prints a page of multiple
patterns of vertical lines, each of which is assigned an offset
value. Look for the pattern that is most closely aligned.
|
|
|
|
Aligned
Not aligned
8. Enter the offset value of the pattern that is most closely
aligned and press
Enter
. The printer prints another sheet to
verify that the alignment is correct.
9. If the vertical lines on the sheet are aligned, select
Done
.
If the lines are not aligned, select
Re-calibrate
; then press
Enter
to repeat the calibration.
If you notice later that the vertical alignment of your printed
pages is off, repeat the calibration procedure.
L
Hudson User’s Guide
A5 size
Chapter 3
10-28-95
DR, pass 2-Rev1
3-16
Maintenance
