❑
Loading position. Determines the top margin by defining
how close to the paper edge the first line can print. The
loading position can be 3 mm or 8.5 mm (default).
Normally you should use your software to adjust your top
margin.
❑
Font and Pitch. Select the built-in printer font and character
pitch used as the default setting. The factory default pitch is
10 cpi; the default font is
Courier
. Generally you use your
software to select the font and pitch.
❑
Thick paper. Select Envelope (default) if you print on thick
paper or envelopes.
To turn on the Default setting mode and print instructions, turn
off the printer. Then hold down the
Pause
button while you
turn the printer back on. Follow the instructions the printer
prints to change the default settings by pressing the buttons on
the control panel. When you are finished, press
Pause
and turn
off the printer to exit Default setting mode. (If a partial page
feeds before you press
Pause
, press
Load/Eject
to clear the
paper path.)
L
Hudson User’s Guide
A5 size
Chapter 2
10-28-95
DR, pass 2-Rev1
2-24
Controlling the Printer
