Portrait
or
Landscape
Select either the
Portrait
or
Landscape
button to specify the
orientation of the image on the page. In portrait orientation, the
top of the page is parallel to the short edge of the paper. In
landscape orientation, the top of the page is parallel to the long
edge of the paper.
Normally you should select the page orientation in your
software application, not with the driver.
Paper source
For your printer, the paper source is always
Auto Sheet
Feeder/Manual
.
Copies
Allows you to specify the number of copies to be printed,
whether to collate them (print them in sets), and whether you
want to print the pages in reverse order (from last page to first
page).
Normally you should select these three settings from the Print
dialog box in your software program, not with the driver. Be
sure you do not choose multiple copies in both the Print dialog
box and the driver.
Note
:
The
Copies
options may require additional system memory. If you
see an error message or are unable to print using these options, try
closing any unnecessary applications, reducing the size of your print
job, turning off the
Copies
options, or increasing system memory.
R
Hudson User’s Guide
A5 size
Chapter 2
10-28-95
DR, pass 2-Rev1
Controlling the Printer
2-11
