Loading Plain Paper
This section explains how to load plain bond paper in the
printer. For instructions on loading coated or glossy paper,
envelopes, and transparencies, or on feeding paper one sheet at
a time, see page 1-8.
You can load up to 100 sheets of plain paper in the sheet feeder.
Be sure to load it with the printable surface facing up. The
printable surface is marked with an arrow on most plain paper
packaging.
Note:
You can use these instructions for printing on labels; however, be sure
to set the paper thickness lever to the thick paper position and the
thickness adjustment lever to the + position. Also make sure no labels
are curled or peeling away from the backing when you load them.
1. Slide out the output tray located at the bottom of the printer;
then pull out the extension.
HW 16t
L
Hudson User’s Guide
A5 size
Chapter 1
10-28-95
DR, pass 2-Rev1
1-6
Paper Handling
