Epson Stylus Color 800N Page 62 User Manual Download

Page: 62 / 106

Maintenance and Transportation

5-3

The print heads move slightly left and the

power light

begins flashing. (The print heads return to their home
position if you don’t proceed to step 4 within 60 seconds.)

4. Pull up the ink cartridge clamp. (Although the illustration

shows the black ink cartridge, the procedure is the same for
replacing the color ink cartridge.)

The cartridge rises up from its holder.

5. Lift the cartridge out of the printer and dispose of it

carefully.

6. Follow the steps in the next section to install the new ink

cartridge.

Caution:
Don’t open the clamp or
remove a cartridge
except to replace it with
a new one. Once you
remove a cartridge, you
can’t reuse it, even if it
contains ink.

Warning:
If ink gets on your hands,
wash them thoroughly
with soap and water. If ink
gets into your eyes, flush
them immediately with
water.

easch5.fm5 Page 3 Monday, November 25, 1996 4:43 PM

Summary of Contents for Stylus Color 800N











































































































Search results

Summary of Contents for Stylus Color 800N

Reviews:

Related manuals for Stylus Color 800N

Brands by name

Popular brands

Epson Stylus Color 800N, User Manual

Search results

Summary of Contents for Stylus Color 800N

Reviews:

Related manuals for Stylus Color 800N

Brands by name

Popular brands