Technical Specifications
B-7
Control Panel Settings
You can change the following “default” settings from the printer’s
control panel:
Changing control
panel settings
Follow these steps to change the settings listed above:
1.
Make sure the printer is turned off and has paper loaded.
2.
Hold down the
X
color cleaning button and press the power
button. The printer prints a summary of instructions for
changing settings and choosing the language to use for additional
instructions.
3.
Press the
X
color cleaning button to print a list of current settings
and additional instructions.
4.
After you make the changes you want, turn the printer off to save
the settings. The settings remain in effect until you change them
again.
Setting
Options
Print direction
Auto, Bi-D, Uni-D
Font
Courier, Roman, Sans Serif, Prestige,
Script, Roman T, Sans Serif H, Draft
Pitch
10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20 cpi,
Proportional
I/F mode
Auto, Parallel, Serial, Option
Auto I/F wait time
10 seconds, 30 seconds
Software
ESC/P 2, IBM X24E
Auto CR (IBM mode only)
Off, On
AGM (IBM mode only)
Off, On
Character table
PC437, PC850, PC860, PC861, PC863,
PC865, Abicomp, BRASCII, Roman 8, ISO
Latin 1, Italic U.S.A., Italic France, Italic
Germany, Italic U.K., Italic Denmark 1,
Italic Sweden, Italic Italy, Italic Spain 1
Auto line feed
Off, On
Network I/F mode
Off, On
Loading position
8.5 mm, 3 mm, Others
Economy
Off, On
Parallel I/F transfer rate
Fast, Normal
easapb.fm5 Page 7 Tuesday, January 14, 1997 9:54 AM
