Make sure the printable surface faces up. For coated papers,
the printable side is whiter than the other side. For glossy
paper and transparencies, the printable side is face up
when the cut corner is positioned as shown in the
illustration below.
5. Change the Media Type and other printer driver settings so
they are appropriate for the paper or transparency film you
loaded. (For instructions, see Chapter 2 for Windows or
Chapter 3 for Macintosh.)
Loading Envelopes
For detailed specifications on the thickness and weight of the
envelopes you can load, see Appendix A. Do not use envelopes
that are curled or folded, or ones that are too thin; they may
curl during printing. Also, do not choose 720 dpi resolution for
envelope printing.
Follow these steps to load envelopes:
1. Make sure you set the paper thickness and thickness
adjustment levers to the correct positions for envelope
printing, as described on page 4-3.
1-4ne2
R
Elbe+
A5 size
Chapter 4
3-26-96
MT, pass 5
Paper Handling
4-9
Summary of Contents for Stylus Color 500
Page 95: ...L Elbe A5 size Chapter 5 3 25 96 MT pass 5 5 16 Controlling the Printer ...
Page 111: ...L Elbe A5 size Chapter 6 3 25 96 MT pass 5 6 16 Maintenance ...
Page 153: ...L Elbe A5 size Appendix B 3 25 96 MT pass 2 B 10 Commands and Character Tables ...
Page 157: ...L Elbe A5 size Glossary 3 25 96 MT pass 3 4 Glossary ...
