Make sure the paper thickness and thickness adjustment levers
are set correctly for your media type; see Chapter 3 for
instructions.
Make sure the printer driver’s
Copies
setting and the copies
setting in your application software are set to print one copy at
a time. Also verify that you have selected the correct paper size
in the driver and in your application software.
Ejected paper is wrinkled.
The paper may be too thin or damp. Do not store paper in
damp or humid places.
Paper does not fully eject.
Use the
Load/Eject
button to eject the page.
The paper may be too long. Use paper that is within the
maximum size listed in Appendix A.
Paper is feeding crooked.
The paper is old or creased. Use only new, smooth sheets of
paper.
Too much paper is loaded in the sheet feeder. Remove a few
sheets.
The paper is not the proper size and quality; see Appendix A
for exact specifications.
Troubleshooting
6-15
