5. Reload the paper straight down into the printer as shown.
Then rest it against the paper support.
Testing the Printer
Before continuing, test the printer to make sure it is functioning
properly. Make sure you loaded paper that is at least 8.25
inches (210 mm) wide.
1. Press the
POWER
switch to turn off the printer.
c
Caution:
Never turn off the printer by unplugging it or turning off
a power strip. Always turn it off with the
POWER
switch.
2. Hold down the
Cleaning
button while pressing the
POWER
switch to turn on the printer. Keep holding down
Cleaning
until the printer begins feeding a page. The test
prints in black on the first and last lines of the first sheet to
measure the page length.
3. After the first page prints, press
Load/Eject
to print the next
page containing character samples of the internal fonts and,
when the color print head is installed, available colors.
4. To end the self test, wait until the printer ejects the paper and
then turn off the printer.
Setting Up the Printer
1-17
