background image

Appendix B: Specifications and Notices

61

PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. 
IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED 
TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY 
STATEMENT OR REPRESENTATIONS MADE BY ANY OTHER PERSON OR FIRM ARE 
VOID. EXCEPT AS PROVIDED IN THIS WRITTEN WARRANTY, NEITHER EPSON 
AMERICA, INC. NOR ITS AFFILIATES SHALL BE LIABLE FOR ANY LOSS, 
INCONVENIENCE, OR DAMAGE, INCLUDING DIRECT, SPECIAL, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE OR INABILITY TO USE THE 
EPSON PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY OR ANY 
OTHER LEGAL THEORY.

In Canada, warranties include both warranties and conditions.

Some jurisdictions do not allow limitations on how long an implied warranty lasts, and some 
jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the 
above limitations and exclusions may not apply to you. This warranty gives you specific legal rights and 
you may have other rights which vary from jurisdiction to jurisdiction.

Epson America, Inc. 

 

O

   

P.O. Box 93012  

O

   

Long Beach, CA 90809-3012 

c82WN.book  Page 61  Thursday, January 16, 2003  2:47 PM

Summary of Contents for Stylus C82WN









































































Reviews: