Epson Stylus C80WN Setup And Installation Manual Download Page 43

Page: 43 / 67

Installing Software and Configuring the Print Server

For descriptions of all the settings on the Wireless Server
Configuration screen, see Appendix A.

9. Optionally, change the Server Name to something that is easy to remember, or

enter a password to limit access to the Wireless Server Configuration screen.

This password does not affect access to your AirPort network. To
enable password protection on your network, see page 46.

You can enter up to 32 characters in the Server Name field, and up
to 16 characters in the Password field.

10. Make any other changes you want

and click

. When you see the

Wireless Server Search window
again, click

QUIT

11. Open the Chooser from the Apple

menu.

12. Click the

C80 Series

icon, then click the

EPSON Stylus

C80 printer port

icon.

Turn on background printing if you want, and close the Chooser.

You’re ready to print. For instructions, see

Printer

Basics

Now that you’ve installed the print server software, you can change the print server’s
configuration at any time. To start WP-Admin, do one of the following:

■

Double-click the

WP-Admin

alias on your desktop, if you’ve created one.

■

Double-click the

EpsonNet

folder on your hard drive and then double-click

the

WP-Admin

icon.

Summary of Contents for Stylus C80WN




































































Search results

Summary of Contents for Stylus C80WN

Reviews:

Related manuals for Stylus C80WN

Brands by name

Popular brands

Epson Stylus C80WN, Setup And Installation Manual

Search results

Summary of Contents for Stylus C80WN

Reviews:

Related manuals for Stylus C80WN

Brands by name

Popular brands