Epson Stylus C80N, Setup And Installation Manual

Page: 22 / 58

Installing the Print Server Software
17
Installing EpsonNet WinAssist
Before you install the software, make sure you set up the required protocols and
services in your operating system. If you install EpsonNet WinAssist before you add
or delete protocols or services, the software might not work and you might need to
uninstall and then reinstall EpsonNet WinAssist. See the
Administrator’s Manual for
more information.
Follow these steps to install EpsonNet WinAssist:
1. Insert the Printer Software CD-ROM in your drive. You see the Installation
Program window.
2. Double-click
Install EpsonNet WinAssist
, then follow the instructions on the
screen to install the program.
You can also install the program by running the SETUP.EXE program in
the ENWINA\Disk1 folder on the Printer Software CD-ROM.
EpsonNet MacAssist
The EpsonNet MacAssist program lets you configure the print server for TCP/IP or
AppleTalk in a Macintosh environment. This section includes system requirements
and installation instructions for EpsonNet MacAssist. See the
Administrator’s Manual
for complete instructions on using EpsonNet MacAssist.
TCP/IP is used for configuration and administration using a browser.
Installing EpsonNet MacAssist
1. Insert the Printer Software CD-ROM in your drive.
2. Double-click the
EpsonNet MacAssist
icon and follow the instructions on the
screen.