Epson Stylus 800 Series User Manual Download Page 57

Page: 57 / 102

Plug another electrical device into the outlet to determine

whether it is working.

The lights come on briefly but then go off and stay off.

Check that the printer’s voltage rating matches the voltage of

your electrical outlet. If the voltages do not match, unplug the

printer and contact your dealer immediately. Do not reconnect

the power cord to an electrical outlet.

All lights on the control panel are on but nothing prints.

Contact your dealer.

Printing stops and the printer beeps five times.

carriage error occurred. Turn off the printer. After a few

seconds turn it on again.

The

Ink Out

light flashes.

The ink cartridge is almost out of ink. Get ready to replace the

ink cartridge.

The

Ink Out

light is on and the printer beeps three times; the printer

does not

The ink cartridge may be empty, or not installed at all. Replace

the ink cartridge with a new one.

Printing stops and the

Pause

light is on.

Printing was temporarily suspended. Press the

Pause

button to

continue.

3-6

Maintenance and Troubleshooting

Summary of Contents for Stylus 800 Series







































































































Search results

Summary of Contents for Stylus 800 Series

Reviews:

Related manuals for Stylus 800 Series

Brands by name

Popular brands

Epson Stylus 800 Series, User Manual

Search results

Summary of Contents for Stylus 800 Series

Reviews:

Related manuals for Stylus 800 Series

Brands by name

Popular brands