Hold down this button for several seconds to move the print
head to the ink cartridge replace position when the printer is
paused.
The button also alters the functions of the other buttons.
Hold down the button and press another button to change
the functions as follows:
PRINT HEAD
Pause)
Starts print head cleaning cycle. See “Cleaning the Print
Head” on page
for details.
Reset
Load/Eject)
Clears the printer’s buffer and initializes the printer
settings to their factory settings. See “Initialization” on
page
for details.
MICRO FEED:
Font)
Feeds paper forward in 1
increments.
Economy/Condensed)
Feeds paper backward in
increments.
See “Controlling the Page with Micro Feed,” below for
details.
Controlling the Page with Micro Feed
You can use the printer’s micro-feed feature to adjust the paper
loading position or to adjust the current print position during a
print job.
When you adjust the loading position for single-sheet paper,
the printer remembers the new position only until you turn off
the power. The loading position
to the factory setting
when the power is
on again.
2-8
Using
Other
Printer Functions
Summary of Contents for Stylus 800 Series
Page 1: ...U S E R S G U I D E 3 Stylus 800 400282000DO 101 00 ...
Page 6: ...Bit image A 20 Graphics A 21 Character Tables A 21 Glossary Index ...
Page 73: ......
Page 88: ...i ...
