5. The printer is ready to print. When it receives data, it loads
a single sheet from the sheet feeder or manual feed slot.
Note:
The paper eject guides raise automatically when a single sheet is
loaded from the sheet feeder.
Switching to Continuous Paper
To switch from single sheets back to continuous paper, follow
the steps below:
1. If a single sheet is in the paper path, press the
Load/Eject
button to eject it.
2. Raise the paper-release lever to the continuous-paper
position.
Note:
If the
Data
and
Paper Out
lights flash, you may have moved
the paper-release lever before ejecting a sheet of paper. Raise the
paper-release lever to the single-sheet position and press the
Load/Eject
button; then lower the paper-release lever to the
continuous-paper position.
3. Lower the page eject guides.
4. Change the driver settings to match your paper source,
size, and type.
5. The printer is ready to print. When it receives data, it loads
continuous paper from the tractor feeder and begins to
print.
1-32
Paper Handling
