Epson ST-3000, User Manual

Page: 123 / 237

123
Scan to setting Available options Description
Density –4 to +4 Adjusts the lightness or darkness of scanned
images.
Remove Shadow On Erases the shadows that appear in the center of
a document when copying a book or the
shadows that appear around a document when
copying thick paper
Off
Remove Punch Holes On Erases the binding holes on a document
Off
Parent topic: Starting a Scan Using the Product Control Panel
Changing Default Scan Job Settings
You can view or change the default scan job settings your product uses when you scan to your
computer. You do this using the Event Manager program.
1. Do one of the following to open Event Manager:
• Windows 10: Click and select EPSON Software > Event Manager .
• Windows 8.x : Navigate to the Apps screen and select Event Manager .
• Windows (other versions) : Click or Start > All Programs or Programs > EPSON Software
> Event Manager .
• Mac : Open the Applications folder, click Epson Software , and select Event Manager .
2. Open the Scanner (Windows) or Select Scanner (Mac) drop-down list and select your product, if
necessary.
3. Click Make Job Settings .
4. Open the Edit Job Settings drop-down list and select the scan job settings you want to view or
change.
5. Change the settings as necessary.
Note: If you create a new job, you can only assign it to the Custom Action setting. You can change
the settings of the other assigned jobs, but you cannot rename them or select a different job.
6. Click OK .
7. Click Close to close the Event Manager window.