24
Chapter 1
Getting Ready
1-6 Setting GPS (GPS search)
When changing to each measurement function for chronograph, exercise, and
interval, the device receives a signal from the GPS and assigns a GPS to be used for
measurements (GPS search).
While performing a GPS search, make sure you are outside with no obstructions
overhead, and try to keep the device as still as possible.
This section explains how to perform a GPS search using the chronograph function as an
example.
1
Press to display the [Menu].
2
Use / to highlight [Chronograph], and then press .
The [Searching] screen is displayed. When the GPS search is complete, the
chronograph screen is displayed.
Chronograph screen
For a more accurate measurement the first time you use the device or when
resetting the system, display the chronograph screen while you are outside for
at least 15 minutes with no obstructions overhead after starting the GPS search.
