Epson SQ-2000, Operating Manual

Page: 19 / 181

Figure 1-6. Installing the single-sheet paperguide
4
Setting Up the Single-Sheet Paper Guide
You’ll use the single-sheet paper guide to feed individual sheets
of paper into the SQ-2000.
To install this guide, hold the guide in both hands, facing the
front of the printer.
With the guide tilted away from you, lower its two notched
feet into the two slots shown above.
At the back of each slot is a round horizontal bar. Place the
notches in the guide’s feet on these two bars.
Then tilt the guide toward you and press gently until it locks
into place with a click.
To remove the guide, press on the two locking levers and tilt
the guide away from you. Then lift it free of the printer.
10