Epson SQ-2000, Operating Manual

Page: 149 / 181

Appendix D
Setting the DIP Switches
The SQ-2000 is provided with two sets, or panels, of dual
in-line package (DIP) switches.
When these switches are preset, the printer assumes a certain
set of conditions each time it is turned on or reset.
For instance, if you usually print standard-sized business
documents, set the column DIP switches so that the printer al-
ways assumes the necessary printing area. But if you plan to do a
number of horizontal spreadsheets, the SQ-2000 allows you to
select a different page size.
Most users will find there’s little need to change the switches
from the factory settings (except in special instances).
Location of Switches
One set of DIP switches is located on the right beneath the
dust cover (see Figure D-l). These are used to change the width
of printing and allow the use of the optional cut sheet feeder.
They are referred to as the
column DIP switch panel.
D - l