Epson SQ-2000, Operating Manual

Page: 117 / 181

Vertical Spacing Commands (continued)
Function:
Cancel bottom margin
Format:
ASCII <ESC> “0”
Decimal 27 79
Hexadecimal 1B 4F
Remarks:
Sets the bottom margin to 0 lines. The command uses the letter
“0”, not the number zero.
Function:
Vertical tab
Format:
ASCII <VT>
Decimal 11
H e x a d e c i m a l 0 B
Remarks:
Advances the paper to the next vertical tab position. If no
vertical tabs have been set, this code advances the paper one
line.
Function:
Set vertical tabs
Format:
ASCII <ESC>
“B”
n1 n2 n3 ...
< N U L >
Decimal 27 66
n1 n2 n3 ... 0
H e x a d e c i m a l 1 B
42
n1 n2 n3 ... 00
Remarks:
Sets the vertical tabs on lines
n1, n2, n3,
etc. You can set up to
16 vertical tab positions. The values of n1, n2, n3, etc. can range
from 1 to 254 and must be entered in ascending order.
A-5