Appendix
Moving or Transporting
When you transport the product, see the
SpectroProofer
Mounter 17" Setup Guide
and be sure to repack the
product using the original box and packing materials.
Removing the mounter and ILS20EP/ILS20EPUV
U
System Requirements
Refer to the ReadMe.txt of your software for the
minimum and recommended computer system
requirements necessary to use this product.
c
Caution:
To use the SpectroProofer Utilities, the printer
driver must be installed on the computer.
Specifications
Specifications
Measurement
device
X-Rite ILS20EP (without UV filter)
ILS20EPUV (with UV filter)
Color
measurement
method
Line color measurement
Available color
measurement
width
432mm
Available color
measurement
length
Maximum when feeding from the
back
Color measurement length:
600mm
Environmental
conditions
Temperature
Operating: 10 to 35˚C (50 to 95˚F)
Storage: -20 to 40˚C (-4 to 104˚F)
Specifications
Environmental
conditions
Humidity
Operation: 30 to 80%
Storage: 5 to 85% (without
condensation)
Dimensions
(W
×
D
×
H)
725
×
266
×
193 mm
Weight (mounter
only)
Approx. 8.7 Kg
Power supply
voltage
Input DC42V
DC output
5.5v 1.0A (the power for ILS20EP/
ILS20EPUV)
Accessories
White calibration tile holder,
Backing(white/black), Paper guide
unit for SpectroProofer Mounter
Backing
specification
White/Black compliant with
ISO13655
ILS20EP/ILS20EPUV specifications
Product model
ILS20EP, ILS20EPUV
Source of light
Tungsten lamp 2850K
Spectrum sensor
X-Rite New LIST Technology
Measure: 16 points (20nm step)
Report: 31 points
Measurement
geometry
condition
0˚/ 45˚ ANSI / ISO 5.4
Measurement
aperture
3.55 mm diameter
Spectrum
Measurement: 16 points
Output: 31 points
Angle of field
2˚/ 10˚
Source of light type
A, C, D50, D55, D65, D75, F2, F7, F11,
F12
Spectrum
wavelength area
400 to 700nm
Measurement
range
0 to 150% R (reflection)
Repetition
precision
Max 0.2 dE cmc / White tile
Max 0.8 dE cmc / Black tile
SpectroProofer Mounter 17" User’s Guide
Appendix
20
