Epson SF-510 User Manual Download

Page: 102 / 149

Setting the Interval
Function (SF-710 only)

When making the Interval setting, you can also
customise your sprint and recovery intervals.

Setting intervals

Display the Model Settings for Run
Connect.

“Starting Run Connect and Displaying the

Settings Screen” on page 92

Click the

Interval

tab.

When registering new data, select

Data

, and then click the

Edit

button.

When editing registered settings,
select the setting you want to edit, and
then click the

Edit

button.

Enter or edit the

Title

Enter the title using letters, numbers, hyphens, or
underscores.

Click the

Add

button.

Next, we will explain how to register new data.

When editing registered settings, select the
setting you want to edit, and then click each
button.

Button

Explanation

Add

Insert

Insert a new setting
before the
registered settings.

Edit

Edit registered
settings.

Delete

Delete registered
settings.

Move Down

Move the registered
setting down.

Move Up

Move the registered
setting up.

SF-710/510/310 User Manual

Setting Measurements Using the PC Application (Run Connect) (SF-710 only)

102

Summary of Contents for SF-510





















































































































































Search results

Summary of Contents for SF-510

Reviews:

Related manuals for SF-510

Brands by name

Popular brands

Epson SF-510, User Manual

Search results

Summary of Contents for SF-510

Reviews:

Related manuals for SF-510

Brands by name

Popular brands