F
On the Large copy screen, you can press the
d
/
u
buttons to select the number of copies.
Press the
Z
button to start copying.
To change the copy settings or enlargement ratio,
press the Menu button to display the Copy
settings menu. When the MFP Scanner is
connected to the SC-T7200D Series/SC-T5200D
Series, you can specify whether to print to Roll 1
or Roll 2 in the Copy settings menu.
Using the Copy Settings menu
U
Settings
U
“Large Copy / Large Scan menu” on
G
When copying has finished, the screen returns to
the one in Step 6. Press the
r
button to eject the
document. When the
Z
button is pressed after
loading a document, copying can continue.
After copying has finished, always eject the
document. If the next document is loaded with
the previous document still inside, the next
document cannot be fed correctly.
You can change the eject direction of the
document. Changing the eject direction
U
“Changing the document eject direction” on
page 78
Large Scan
This section describes the procedure to scan on the
control panel of the printer.
Buttons that are used in the following settings
A
Turn on the printer by pressing the
P
button.
If the printer is turned on, the scanner is also
turned on.
B
Load paper suitable for the large scan function of
the printer.
U
“Epson Special Media Table” on page 196
C
Load document on the scanner.
U
“How to Load Documents” on page 74
D
Make sure that the Large copy/Large scan screen
appears.
If another screen appears, use the
l
/
r
buttons to
select the
tab.
E
At Large copy/Large scan screen, use the
d
/
u
buttons to select
Scan
and press the
Z
button.
A screen appears to select the save/send
destination of the scanned file.
F
Use the
d
/
u
buttons to select save/send
destination and press the
Z
button.
If the
HDD
was selected, proceed to Step 8.
If
Shared Folder
or
Send By Mail
was selected,
proceed to Step 7.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Copying and Scanning
77
