Epson SC-T3100x Series User Manual Download Page 160 | Manualshive

Page: 160 / 173

background image

Moving or Transporting
the Printer

This section describes methods for moving and
transporting the product.

Caution:

❏

The printer is heavy, so ensure more than one
person is used for these actions. Make sure the
product is carried by two people or more when
packing or moving it.

❏

When you lift the printer, maintain a natural
posture.

❏

When you lift the printer, place your hands at
the specified locations on the left and right as
indicated in the following illustration.
If you lift the printer while holding other
sections, you may be injured. For example,
you may drop the printer or your fingers may
be pinched when lowering the printer.

❏

Do not tilt the product more than 10 degrees
forward, back, left, or right while moving it.
Failure to observe this precaution could result
in the printer falling over, causing accidents.

❏

When transporting this product, attach the
transportation caps and then secure the ink
tank caps.
Otherwise, ink could leak.

c

Important:

When moving or transporting the product, be sure
that it is level; do not tilt it at an angle or place it
upside down. Otherwise, ink could leak.

Moving to a Different Location
in the Same Building

Preparations for Moving

This explains preparations for moving the printer a
short distance, for example within the same building.
See the following section for information on moving
the printer between floors or to another building.

U

“When Transporting” on page 163

When the optional stand is installed, moving the
printer on casters is possible if there are no steps or
unevenness in the floor along the route, however pay
attention to the following points.

Caution:

When the optional stand is installed, ensure that
you abide by the following points in order to
prevent damage from falling over.

❏

Do not move the printer with casters locked

❏

Avoid areas with steps or unevenness

❏

After moving, ensure the casters are locked
before use

A

Remove all paper from the printer. Make sure
you remove the Paper Stacker if it is installed.

SC-T3100x Series User's Guide

Appendix

160

«
...
158
159
160
161
162
...
»

Summary of Contents for SC-T3100x Series














































































































































































Reviews:

No comments

Related manuals for SC-T3100x Series

Brand: Olympus Pages: 71

SCX-4300 - SCX 4300 B/W Laser

Brand: Samsung Pages: 97

SCX 4828FN - Laser Multi-Function Printer

Brand: Samsung Pages: 151

SCX 4725FN - B/W Laser - All-in-One

Brand: Samsung Pages: 120

SCX 4500 - B/W Laser - All-in-One

Brand: Samsung Pages: 97

SCX 4200 - B/W Laser - All-in-One

Brand: Samsung Pages: 95

SCX 4500 - B/W Laser - All-in-One

Brand: Samsung Pages: 172

ProXpress M337x

Brand: Samsung Pages: 56

PROXPRESS M332 SERIES

Brand: Samsung Pages: 50

ML-2240 - 23 Ppm Mono Laser Printer

Brand: Samsung Pages: 82

Brand: Samsung Pages: 8

ML-1610 - B/W Laser Printer

Brand: Samsung Pages: 134

ML-1610 - B/W Laser Printer

Brand: Samsung Pages: 112

Brand: Samsung Pages: 128

Brand: Samsung Pages: 152

ML 3471ND - B/W Laser Printer

Brand: Samsung Pages: 207

ML 2150 - B/W Laser Printer

Brand: Samsung Pages: 237

ML 3471ND - B/W Laser Printer

Brand: Samsung Pages: 103

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands