Supported Commercially Available Paper
This printer supports the following paper specifications for non-Epson media.
c
Important:
❏
Do not use paper that is wrinkled, scuffed, torn, or dirty.
❏
Commercially available paper corresponding to the paper types in the table can be loaded in and fed
through the printer as long as they meet the following specifications, however Epson cannot guarantee the
print quality.
❏
Commercially available paper types not in the table can be loaded in the printer as long as they meet the
following specifications, however Epson cannot guarantee the feed and print quality.
Roll Paper
Paper Type
Plain paper, coated paper, photo paper, tracing paper, matte film
Roll core size
2 inch
Roll paper outer diameter
110 mm or less
Paper width
SC-T5100 Series/SC-T5100N Series: 329 to 914 mm (36 inch)
SC-T3100 Series/SC-T3100N Series: 329 to 610 mm (24 inch)
Paper thickness
0.05 to 0.21 mm
Roll weight
3 kg or less
Cut Sheet (Auto Sheet Feeder)
Paper type
Plain paper, coated paper, photo paper
Paper size
A4 to A3
Paper thickness
0.12 to 0.27 mm
The maximum number of sheets that can be set in the auto sheet feeder is 50 for plain paper, and 5 for other types
of paper.
However, depending on the thickness of the paper, feeding paper may fail even if the numbers of sheets lower than
these are set. In these cases, reduce the number of sheets of paper loaded.
Cut Sheet (1 Sheet)
Paper type
Plain paper, coated paper, photo paper, tracing paper, matte film
Paper width
SC-T5100 Series/SC-T5100N Series: 210 to 914 mm (36 inch)
SC-T3100 Series/SC-T3100N Series: 210 to 610 mm (24 inch)
SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide
Appendix
160
