Caution:
❏
Store ink cartridges, ink supply units, cleaning
cartridges, cleaning ink supply units, ink
cleaner, grease, and waste ink out of the reach
of children.
❏
During maintenance, wear protective clothing,
including protective eyewear, gloves, and a
mask.
If ink, waste ink, ink cleaner, or grease contact
your skin or enter your eyes or mouth, take the
following actions:
❏
If fluid adheres to your skin, immediately
wash it off using large volumes of soapy
water. Consult a physician if the skin
appears irritated or is discolored.
❏
If fluid enters your eyes, rinse immediately
with water. Failure to observe this
precaution could result in bloodshot eyes or
mild inflammation. If problems persist,
consult with a physician.
❏
If fluid enters your mouth, consult a
physician immediately.
❏
If fluid is swallowed, do not force the person
to vomit, and consult with a physician
immediately. If the person is forced to
vomit, fluid may get caught in the trachea
which can be dangerous.
❏
After replacing the Waste Ink Bottle or using
the ink cleaner, wash your hands and gargle
thoroughly.
❏
Remove the media from the printer before
proceeding.
❏
Never touch the belts, circuit boards, or any parts
that do not require cleaning. Failure to observe this
precaution could result in malfunction or reduced
print quality.
❏
Use only the supplied cleaning sticks or sticks
contained in a maintenance kit. Other types of
sticks that produce lint will damage the print head.
❏
Always use fresh cleaning sticks. Re-using sticks
can make stains even harder to remove.
❏
Do not touch the tips of the cleaning sticks. Oil from
your hands could damage the print head.
❏
Do not use water or alcohol to clean around the
print head or the caps and so on. Ink congeals when
mixed with water or alcohol.
❏
Touch a metallic object before starting work to
discharge any static electricity.
Daily Cleaning
When lint, dust, or ink adheres to the platen heater or
the media edge plates, it could cause clogged nozzles or
ink drops to occur.
To maintain optimum printing quality, we recommend
cleaning before starting work every day.
Caution:
❏
The heaters and media edge plate may be hot;
observe all necessary precautions. Failure to
observe the necessary precautions could result
in burns.
❏
Be careful not to trap your hands or fingers
when opening or closing the front cover. Failure
to observe this precaution could result in
injury.
c
Important:
When cleaning inside the printer, do not use ink
cleaner. Failure to observe this precaution could
result in damaged parts.
A
Make sure the printer is turned off and the screen
has turned off, and then unplug the power cable
from the outlet.
Disconnect both of the power cables.
If the additional print drying system is installed,
make sure you unplug the power cable for the
additional print drying system as well.
B
Leave the printer for a minute.
C
Open the front cover.
SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
Maintenance
64
