Media Suction
While printing, the printer uses suction to provide the
pressure needed to maintain the correct distance
between the media and the print head; the amount of
pressure required varies with the type of media. Less
suction is used for thin media that would not print or
feed correctly at high levels of suction.
A
Use the
d
/
u
buttons to select
Media Suction
and
press the
Z
button.
B
Use the
d
/
u
buttons to choose a value.
C
Select the desired option and press the
Z
button.
D
Press the
y
button to return to the customize
settings menu.
Head Movement
Choose the range in which the print head moves during
printing.
A
Use the
d
/
u
buttons to select
Head Movement
and press the
Z
button.
B
Use the
d
/
u
buttons to select the desired setting
and press the
Z
button.
For faster printing, select
Data Width
.
For even, high-quality printing, select
Printer
Full Width
.
Multi-Strike Printing
Choose the number of times each line is printed.
A
Use the
d
/
u
buttons to select
Multi-Strike
Printing
and press the
Z
button.
B
Use the
d
/
u
buttons to choose a value.
C
Select the desired option and press the
Z
button.
D
Press the
y
button to return to the customize
settings menu.
Roll Type
Choose
Printable Side Out
or
Printable Side In
according to how the media is rolled.
A
Use the
d
/
u
buttons to select
Roll Type
and
press the
Z
button.
B
Use the
d
/
u
buttons to select the desired setting
and press the
Z
button.
C
Select the desired option and press the
Z
button.
Tension Measurement
Periodically
is recommended in most circumstances.
Choose
Off
if slack develops in the media or other
printing problems occur.
A
Use the
d
/
u
buttons to select
Tension
Measurement
and press the
Z
button.
B
Use the
d
/
u
buttons to select the desired setting
and press the
Z
button.
C
Select the desired option and press the
Z
button.
Media Tension
Increase tension if creases appear in the media during
printing. The higher the value, the greater the tension.
If you have previously performed Feed Adjustment, you
will need to perform it again after adjusting Media
Tension.
U
A
Use the
d
/
u
buttons to select
Media Tension
and press the
Z
button.
B
Use the
d
/
u
buttons to choose a value.
C
Select the desired option and press the
Z
button.
D
Press the
y
button to return to the customize
settings menu.
SC-S30600 Series User's Guide
Basic Operations
44
