Data on a Hard Disk
Data on a hard disk cannot be copied to a computer or
other device. Even when print jobs have been stored on
the hard disk, save the original data on a computer.
Data on a hard disk may be lost or corrupted in the
following situations.
❏
When the disk is affected by static electricity or
electrical noise
❏
When the disk has been used incorrectly
❏
After a malfunction or repair
❏
When the disk was damaged by a natural disaster
We take no responsibility for any data loss, data
corruption, or other problems due to any cause, even
including those listed above and within the warranty
period. Be aware that we are also not responsible for the
recovery of lost or corrupted data.
Saving Print Jobs
This section describes the printer driver settings used to
save print jobs.
Settings on Windows
A
When you have created the data, click
in
the
File
menu.
P
B
After confirming that the printer is selected, click
Printer properties
or
Properties
to display
printer settings.
P
C
On the Page Layout screen, click the
Settings
button from Hard Disk Unit, and then select
Print Job
.
Print operations differ depending on the selected
content as shown below.
❏
Print and Save
:
Saves the job to the hard disk at the same time as
printing. When
Print after Transmission
Completed
is selected, printing starts after the
print job has been saved to the hard disk unit.
❏
Print only
:
Prints the job without saving to the hard disk.
SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
Using the Optional Hard Disk Unit
58
