Epson SC-P10000 SERIES User Manual Download Page 43

Page: 43 / 217

Align the right and leading edges of the paper
with the lines on the poster board support as
shown in (2).

After positioning the media, press the

button.

The paper will be fed into the printer.

Check the media type.

“Checking and Setting the Paper Type” on

page 44

Removing Poster Board

This section describes how to remove poster board
when printing is complete.

Note:

To remove paper that was loaded but not used, press
the

button and select

Remove Paper

Buttons that are used in the following settings

Confirm that the

Paper Eject

message is

displayed in the control panel.

Keeping a hand on the poster board to prevent
it falling from the printer, press the

button.

Pull the poster board forward as shown in the
on-screen instructions.

After removing the poster board, press the

button.

Important:

Unless you are going to continue making
poster board prints, store the poster board
support.

SC-P20000 Series/SC-P10000 Series User's Guide

Basic Operations

Summary of Contents for SC-P10000 SERIES


























































































































































































































Search results

Summary of Contents for SC-P10000 SERIES

Reviews:

Brands by name

Popular brands

Epson SC-P10000 SERIES, User Manual

Search results

Summary of Contents for SC-P10000 SERIES

Reviews:

Brands by name

Popular brands