Epson SC-P10000 SERIES User Manual Download Page 149

Page: 149 / 217

Block Pattern

Select

Paper Feed Adjust

on the control panel.

“Selecting Paper Feed Adjust” on page 148

Press the

buttons to select

Block Pattern

and then press the

button.

A dialog is displayed.

Press the

button again.

The adjustment pattern is printed.

From the printed pattern, select the pattern
with the fewest lines.

This would be pattern 0 in the example shown
in the illustration.

Check that the

Primary

screen is displayed on

the control panel, use the

buttons to select

the number you confirmed in step 4, and then
press the

button.

If a message is displayed, press the

button.

An adjustment pattern that differs to the one in
step 3 is printed.

Compare the colors in the center of the printed
patterns, and then select the pattern with the
lightest color.

This would be pattern 0 in the example shown
in the illustration.

Check that the

Secondary

screen is displayed

on the control panel, use the

buttons to

select the number you confirmed in step 7, and
then press the

button.

When settings are complete, the Ready screen is
displayed.

Crosshairs

Select

Paper Feed Adjust

on the control panel.

“Selecting Paper Feed Adjust” on page 148

Press the

buttons to select

Crosshairs

, and

then press the

button.

A dialog is displayed.

Press the

button again.

The adjustment pattern is printed.

Measure the distance between the "+" symbols.

Use the

buttons to change the value

displayed on the control panel screen so that it
matches the value you measured, and then
press the

button.

When settings are complete, the Ready screen is
displayed.

SC-P20000 Series/SC-P10000 Series User's Guide

Maintenance

149

Summary of Contents for SC-P10000 SERIES


























































































































































































































Search results

Summary of Contents for SC-P10000 SERIES

Reviews:

Brands by name

Popular brands

Epson SC-P10000 SERIES, User Manual

Search results

Summary of Contents for SC-P10000 SERIES

Reviews:

Brands by name

Popular brands