SC-F9200 Series
Revision C
ADJUSTMENT
Boards Related Checks and Adjustments
343
SE Group Confidential (Related Staff Only)
4.14.2 RTC&USB ID Input
EXECUTION MODE
Serviceman Mode
PROCEDURE
1.
Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing
[Menu] + [Back] + [OK]
.
2.
Start the Service Program and select
RTC&USB ID Input
.
3.
Check the
Date
and
Time
displayed, and correct them if necessary.
4.
Click
[Write RTC]
to set the RTC.
5.
Enter the 10-digit serial number of the printer to generate a USB ID.
6.
Click
[Write USB ID]
to write the USB ID.
7.
Click
[Finish]
.
8.
Turn the printer OFF.
9.
Turn the printer on in the normal mode.
10. On the control panel, verify that the setting has been correctly applied.
If the setting is incorrect, set the date and time on the control panel.
11. Turn the printer off.
Figure 4-66. [RTC&USB ID Input] Screen
C A U T I O N
If the printer is turned OFF and back ON after changing the USB
ID, the computer (Windows) detects the USB port as a new port
and automatically copies the printer driver as xxxx (copy x). If you
need to perform another adjustment using this tool, select the
“copy x” driver.
Summary of Contents for SC-F9200 series
