C
Select the size specification method from Width,
Length, and Scale to and then enter the setting
value.
The print image is enlarged or reduced so that it
becomes the specified width, length, or scale
while maintaining the aspect ratio of the print
data.
Windows
Mac
D
Check other settings, and then start printing.
Printing at Non-Standard
Sizes
Before printing at non-standard sizes, including vertical
or horizontal banners and documents with equal sides,
save the desired paper size in the printer driver. Once
they have been saved in the printer driver, custom sizes
can be selected in the application
Page Setup
and other
print dialogs.
The following sizes can be used.
Paper Width
89 to 610 mm
Paper Length
*
127 to 18000 mm
*: The paper length can be longer when using an application
that supports banner printing. However, the actual print size
depends on the application, the paper size loaded in the
printer, and the computer environment.
c
Important:
❏
The smallest size supported by the printer is 89
mm wide × 127 mm long. When a smaller size
than this is set in
Custom Paper Size...
of the
printer driver, trim the unnecessary margins.
❏
For Custom Paper Sizes of a Mac, although you
can specify a large paper size which cannot be
loaded in this printer, it will not be printed
properly.
❏
The available output size is limited depending
on the application.
SC-F500 Series User's Guide
Printing with the Printer Driver from Your Computer
58
