SC-F3030 User Self Repair Quick Guide
Things to take note before performing User Self Repair: -
•
Perform
Maintenance
(Refer to User
’s
Guide)
•
Adjustment film sheet
to be loaded on machine for calibration.
•
Make sure there is
“
Internet Connection
”
.
•
**Only
Print Head
can be replaced in this mode**.
•
For more details, please refer to
“How to Replace Print Head”
for further instructions.
WORKFLOW for
USER SELF-REPAIR
How to activate User Self Repair function
1
2
3
In “
OFF
“mode,
Place right thumb or
an approximately 25 mm (0.98 in.)
diameter coin on the area shown in
the illustration of the printer screen
below, so it is not exposed to light.
While maintaining the conditions
from step 1, press and hold the
power button
until the screen
in the illustration appears. (about 20
sec). If the screen in the illustration
does not appear, and the power just
comes on as normal, turn off the
power and redo the
procedure from
step 1.
Input the "
32998
" passcode.
❏
Press the right side of the screen to
change the numbers from 0 to 9.
❏
Press the left side of the screen to
confirm the selected number and
advance to the next digit for input.
