D
Pass Mode
Displays the current Pass Mode.
U
“Media Settings menu” on page 160
Changing settings while printing
During printing, you can change the settings in the Media Settings displayed in the Home screen. If a problem, such as
banding or wrinkles, occurs, change the Media Settings to fix it. During printing, you can easily solve problems
because you can check the results you see as you make changes. In addition, you can make quick fixes, without
stopping printing, when problems occur shortly after printing starts.
Changing the settings in the Home screen changes the content of the current Media Settings.
For methods to fix problems in print results, see the "Problem Solver" in this manual and "Troubleshooting & Tips" in
the
Online Manual
.
U
This section explains an example of how to do Media Feed Adjustment to compensate for banding.
A
Press
to access the Media Settings screen.
B
Press the Media Feed Adjustment information area.
The settings screen is displayed.
C
Press
/
to change the values.
If the feed amount is too small, black bands (dark stripes) will appear; adjust the feed amount upwards.
If, in contrast, the feed amount is too large, white bands (pale stripes) will appear; adjust the feed amount
downwards.
Note:
When the settings screen for Media Feed Adjustment is displayed, you can change the values by pressing the
/
buttons on the left side of the screen.
D
Change the values as you check the printing results until the problem is completely fixed.
This updates the setting value of Media Feed Adjustment in the currently selected media settings.
E
When adjustments are complete, press
to return to the Home screen.
SC-F10000H Series/SC-F10000 Series User's Guide
Introduction
29
