EN
Installing the Software
TC
安裝軟體
[ [ [
Installing the Required Software
安裝必要的軟體
Ready the printer and computer for connection before proceeding, but do not connect
the cables until the installer prompts you to do so. The required software will not be
installed if the devices are not connected according to the on-screen instructions.
[ 2 [
*1 Consists of the following four applications: Epson Control Dashboard, EPSON Software Updater,
EPSON Manuals, and Epson Communication Driver.
*2 Use the supplied Epson RIP (Epson Edge Print) or a commercially available RIP. Epson Edge Print is
supported under Windows only.
*3 The Epson Control Dashboard can be used via remote access.
*
1
由 下 列
4
種 應 用 程 成 組 成：
Epson Control Dashboard
、
EPSON Software Updater
、
EPSON
Manuals
、和
Epson Communication Driver
.
*2
使用內附的
Epson RIP (Epson Edge Print)
或市售的
RIP
。
Epson Edge Print
僅支援
Windows
。
*3
Epson Control Dashboard
可以透過遠端存取。
在繼續進行之前，請先準備好印表機和電腦的連接，但不要接上連接線，直到安裝程
式提示您這麼做。若沒有依照螢幕上的操作說明連接裝置，則不會安裝必要的軟體。
USB
Network
ON
Software Disc/
軟體光碟片
The installation procedure varies with the operating system.
Windows: Use the supplied software disk. If your computer is not equipped with a disk drive,
❏
follow the instructions for Mac OS X.
Mac OS X: Visit Epson Setup Navi (http://epson.sn/), enter or select the printer model, and select
❏
Setup
.
If the printer is connected to a network, choose one computer to which to install the required
software
*1
and RIP
*2
listed at right.
安裝程序會因作業系統不同而異。
Windows
❏
：使用隨機內附的軟體光碟片。若您電腦沒有內建光碟機，請參閱
Mac OS X
的操作
說明。
Mac OS X
❏
：請至
Epson Setup Navi (http://epson.sn/)
，輸入或選擇印表機機型，然後選擇
〝
設定
〞。
若印表機連接至網路，請從右側顯示中選擇一台已安裝必要軟體
*1
和
RIP
*2
的電腦。
Required software
*1
and RIP
*2
/
必要的軟體
*1
和
RIP
*2
[[
Summary of Contents for SC-B9000 Series
Page 9: ...EN Assembly TC 組裝 9 ...
Page 13: ...EN Assembly TC 組裝 13 ...
Page 16: ... EN Assembly TC 組裝 Connecting Cables 接上連接線 A B 16 ...
Page 27: ...27 MEMO ...
